ENGLISH
91
Emptying surplus water in the hoses
If the kitchen sink is 1 metre from the floor it will not be possible for surplus water in the hoses to run out
properly. The surplus water in the hoses must then be emptied into a basin or the like.
Water outlet
Connect the outlet hose. Fit it correctly to avoid water leakage.
Check that the outlet hose is not bent or clenched.
Extension
If the outlet hose needs extending, use a hose of the same type.
It must not be longer than 4 metres, otherwise this can affect the wash results.
STARTING THE DISHWASHER
Check the following before starting the dishwasher.
1. That the dishwasher is completely level and correctly fixed
2. That the inlet valve is open
3. If there is any leakage at the hose connections
4. That the power cords are correctly fitted
5. That the power switch is switched on
6. That the inlet and outlet hoses are not bent or clenched
7. That the packaging and drawings have been removed from the dishwasher
To Next Page
Loading...
