Change Passcode 1 (key
4
)
This option allows `User 1' to change their own passcode, normally when the system is handed
over to you from the alarm company, the `User 1' passcode will be set to 5678.
Change Chime Zones (key
5
)
This option allows `User 1' to change the zones that `Chime'. Once this option is selected from
`UserOption menu'the procedurefor changing`Chime' zonesis thesame asthe `QuickChime'
procedure described on page 8.
12
User Options TSD402 User Manual
UNSET
Enter first 3 digits of Passcode then
[
(e.g. ,
5 6 7 [
)
USER OPTION -
Press
4
for Passcode 1
Change Passcode 1
PASSCODE 1 ----
Enter new pascode
( e.g.,
2 5 8 0
)
PASSCODE 1 2580
Press
[
to accept.
UNSET
A two-sound in dicates acceptance,
a single low tone indicates that the
passc ode is not available.
Repeat again trying a different
four digit number.
Intelligent Security & Fire Ltd
To Next Page
Loading...
