Problem - When theunit calls the recipientthey can'tacknowledge theunitbypressing the
number [8] butt on.
Cause - Incorrect acknowledgement procedure.
Action - Instruct the recipient in the correct procedure (see page 19).
Cause - Incompatible telephone.
Action - Call the recipient and ask them to press the number [8] button on their
telephone for 3 seconds. If you hear anything other than a 3 second tone, their
telephone is not capable of acknowledging the TSD402. This may be
overcome by using a tone pad to simulate the modern dialling tones. Contact
your installation company for further details.
Problem - The recipient has ackn owledged the call but the TSD402 continues to dial the
second or third number.
Cause - The `Acknowledgement Option' is set to `CLEARED BY ANY 2' or `CLEARED
BY ALL 3'.
Action - Check the option is set to your required setting (see page 22).
Speech Dialler Details
Tel No. 1: Tel No. 2: Tel No. 3:
Common Phrase:
Fire Phrase:
PA Phrase:
Alarm Phrase:
Fire Reports to: Tel No. 1
Tel No. 2 Tel No. 3
PA Reports to: Tel No. 1 Tel No. 2 Tel No. 3
Alarm Reports to: Tel No. 1 Tel No. 2 Tel No. 3
Acknowledgement Option: 1 2 3 None
29
TSD402 User Manual Troubleshooting
Intelligent Security & Fire Ltd
To Next Page
Loading...
