Amb ient
temperature
OF
oc
•86_
-
• 30
• 68
+ 20
•50 -
+ 10
+32 _
-
0
...-23_
- - 5
+ 14-
- - 10
•5
-
- - 15
- 4
-
- - 20
SAE grades
SW 20
20W
40
-.----ii 20W- 50
JO'
1UW 30
5W- 30 ,._ _ _.
N00-0001 -B 13
I SAE 40 o,I may be u~ud dt amb,unt
tempurature ~ contmuuu sly Jbl/Vtl
30"C (86"FI
Ambient
SAE grades
temperature
OF
oc
,--.
_......,,,_ _......,,,_
•86_
-
• 30
• 68
+ 20
- -
+50 -
_ +10
+32_
0
15W -40
-
ISW- 50
10W 40
•23- - -5
IOW- 50
-+14 -
- - 10
•5
-
- - 15
- 4 - - - 20
- -- - -- ---
~
~
N00-0002-813
All-sea sun o,I
52
4 Service products
Components and lubricants must match. Therefore , only brands tested and
recomme nded by us must be used. They are included in the MERCEDES-BENZ
Specifications for Service Products. Corresponding sheet numbers are listed in
section ,,4.4 Capac ities - summary"
MERCEDES-BENZ service stations will give you all the informat ion.
4.1 Engine oils
The suitability of the various engine oils ts specially tested in our engines.
For this reason, only use engine 01ls which have been recommended by our
company.
MERCEDES-BENZ serv ice stations have all the information on recommended
brands.
Caution :
In order to ensure sufficient lubrica!lon of the moving parts, select engine oil
viscosity (SAE grades) according to ambient tempe rature.
Uncompounded engine oils must not be used!
The MERCEDES-BENZ factory or your service station fills a new or a
recondi tioned engine with an initial operallon oil. This is an oil which was specially
developed for the operating conditions during the first 500 to 1 500 km (300 to
900 miles) .
If the oil level reaches the minimum mark on the dipstick before the inspec tion
(500 - 1 500 km 300 - 900 miles), the engine may be topped up with
recommended engine oil if no initial operation oil is available.