210 - 410
1 Dra111 plug - engine
70
- Having drained the coolant, check 11 the drain ports are clogged with residua l
matter.
- Screw in drain plugs.
Filling:
- Fill with coolant to tt1e marking in the filler neck.
- Replace cap of the coolant expansion tank and tighten to the stop.
- Start engine and run lor approx.
1 minute at varying speeds.
- Shut off engine and remove cap ol coolant expansion tank.
- Top up with coo lant to the marking in the filler neck.
- Replace cap of the coolant expansion tank and tighten to the stop.
5.4 Clutch
The clutch is adjusted automat ically.
Adjustments or repa irs should only be earned out at a MERCEDES-BENZ
service station.
To Next Page
Loading...
