Mercury 150 User Manual

TRANSPORTING
20
Trailering Boat/Outboard
Trailer your boat with the outboard tilted down in a vertical operating position.
If additional ground clearance is required, the outboard should be tilted up using an accessory outboard
support device. Refer to your local dealer for recommendations. Additional clearance may be required
for railroad crossings, driveways and trailer bouncing.
ob01074
IMPORTANT: Do not rely on the power trim/tilt system or tilt support lever to maintain proper ground
clearance for trailering. The outboard tilt support lever is not intended to support the outboard for
trailering.
Shift the outboard to forward gear. This prevents the propeller from spinning freely.

Mercury 150 Specifications

General

Fuel Induction System	Electronic Fuel Injection (EFI)
Horsepower	150 hp
Steering	Hydraulic
Shaft Length	20" / 25"
Starting	Electric
Weight	455 lbs (20"), 462 lbs (25")