STORAGE
48
• Spray Quicksilver or Mercury Precision Lubricants Corrosion Guard on external metal surfaces
(except corrosion control anodes).
Tube Ref No. Description Where Used Part No.
120
Corrosion Guard External metal surfaces 92-802878Q55
Gearcase
• Drain and refill the gearcase lubricant (refer to Maintenance - Gearcase Lubrication).
Positioning Outboard For Storage
Store outboard in an upright (vertical) position to allow water to drain out of outboard.
!
CAUTION
If outboard is stored tilted up in freezing temperature, trapped cooling water or rain water that may
have entered the propeller exhaust outlet in the gearcase could freeze and cause damage to the
outboard.
Battery Storage
• Follow the battery manufacturer's instructions for storage and recharging.
• Remove the battery from the boat and check water level. Recharge if necessary.
• Store the battery in a cool, dry place.
• Periodically check the water level and recharge the battery during storage.
To Next Page
Loading...
Need help?
General
