Mercury 150 User Manual

MAINTENANCE
35
1. Remove the plug from fitting in the bottom cowl.
ob01084
2. Attach a water hose to the fitting. Turn on the water and flush for 3 to 5 minutes.
ob01085
Top Cowl Removal And Installation
REMOVAL
1. Pull out the front cowl latch.
ob01086
2. Lift up the rear cowl latch. Remove the top cowl.
ob01087
INSTALLATION
1. Lower top cowl into position over engine.

Mercury 150 Specifications

General

Fuel Induction System	Electronic Fuel Injection (EFI)
Horsepower	150 hp
Steering	Hydraulic
Shaft Length	20" / 25"
Starting	Electric
Weight	455 lbs (20"), 462 lbs (25")