Mercury 150 User Manual

MAINTENANCE
44
• Tilt Support Lever - Lubricate through fitting.
b
ob00683
a
a - Swivel bracket b - Tilt support lever
• Tilt Tube - Lubricate through fitting
ob00684
!
WARNING
The end of the steering cable must be fully retracted into the outboard tilt tube before adding
lubricant. Adding lubricant to steering cable when fully extended could cause steering cable to
become hydraulically locked. A hydraulically locked steering cable will cause loss of steering
control, possibly resulting in serious injury or death.
• Steering Cable Grease Fitting (If Equipped) - Rotate steering wheel to fully retract the
steering cable end into the outboard tilt tube. Lubricate through fitting.
a
b
ob00685
a - Fitting b - Steering cable end
4. Lubricate the following with light weight oil.

Mercury 150 Specifications

General

Fuel Induction System	Electronic Fuel Injection (EFI)
Horsepower	150 hp
Steering	Hydraulic
Shaft Length	20" / 25"
Starting	Electric
Weight	455 lbs (20"), 462 lbs (25")