Mercury 4 SERIES

SHIFT LINKAGE
90-857138R1 MAY 2000 Page 7A-5
5. Remove shift lever.
6. Remove detent ball and spring.
57238
57239
a
b
c
a-Shift Lever
b-Detent Ball
c-Spring
Reassembly/Installation
1. Lubricate detent spring and ball with 2-4-C with Teflon Marine Lubricant and install ball
and spring in cavity as shown.
2. Install two O-rings on shaft of shift lever. Coat shaft and O-rings with 2-4-C with Teflon
Marine Lubricant and install shift lever.
57239
d
e
b
a
56539
95
2-4-C With Teflon (92-825407A12)
95
95
c
a-Detent Spring
b-Ball
c-Cavity
d-O-rings (2)
e-Shift Lever Shaft