Mercury 4 SERIES

GEAR HOUSING
90-857138R1 MAY 2000 Page 6-27
9. Install retainer plate, washer and bolt. Torque bolt to 70 lb-in. (8 Nm).
10. Install water pickup tube seal and apply 2-4-C w/Teflon Marine Lubricant to I.D. of seal.
a
b
c
d
56415 56446
95
95
2-4-C With Teflon (92-825407A12)
a - Retainer Plate
b - Washer
c - Bolt
d - Seal
Propeller Shaft
1. Install sliding clutch so that cross pin hole of clutch aligns with slot in propeller shaft.
2. Install spring.
a
b
c
d
56405 56404
a - Sliding Clutch
b - Cross Pin Hole
c - Slot
d - Spring