OPERATION
95
IMPORTANT: It may be dangerous to attempt shifting at high RPM.
Be sure to slow engine RPM down to idle RPM before shifting.
MH, EH, EHO, EHPTO
Tiller handle models: Turn the throttle grip to the "SLOW" position
and move the shift lever to Forward (F) or Reverse (R) position
swiftly when the engine speed drops to its lowest level.
IMPORTANT: It may be dangerous to attempt shifting at high RPM.
Be sure to slow engine RPM down to idle RPM before shifting.
NOTE: Please follow the instructions below:
1. The engine must be at idling speed when the shift lever is
moved from Forward (F) to Reverse (R).
2. Before moving the shift lever to Reverse (R), ensure the
reverse lock is engaged in the "UP" position.
MH, EH, EHO, EHPTO
3. The shift lever cannot be moved from Neutral (N) to Reverse
(R) unless the throttle grip is placed in the "SLOW" position.
To Next Page
Loading...
Need help?
General
