MAINTENANCE
110
3. Be sure to secure the water strainer and sub‑water strainer on
the gearcase beforehand.
40/50
a - Flushing attachment
(optional)
b - Wash plug
c - Oil plug
d - Tape (for flushing with
screw in attachment)
4. With the shift lever in Neutral (N), run the engine at a low speed
so that water flushes out the cooling system to remove
seawater and mud.
W50
a - Tape
b - Tape (for flushing with screw
in attachment)
c - Oil plug
d - Flushing attachment
(optional)
Top Cowl Removal and Installation
REMOVAL
1. Unlock the rear latch by pushing lever down.