OPERATION
98
2. Before moving the shift lever to Reverse (R), ensure the
reverse lock is engaged in the "UP" position.
EO, EPTO
NOTE: The remote control lever becomes inoperative unless the
neutal warm‑up lever is in the fully closed position.
IMPORTANT: Never shift the outboard into gear unless the engine
speed is at idle. Do not shift the outboard into reverse when the
engine is not running.
Emergency Starting
If the starter system fails, use the spare starter rope (provided) and
follow the procedure.
IMPORTANT: To prevent getting an electrical shock, do not touch
any ignition component, wiring, or spark plug wire when starting or
running the engine.
1. Set the shift lever or the remote control lever to Neutral (N).
To Next Page
Loading...
Need help?
General
