TRANSPORTING
65
5. Manual tilting: If the engine cannot be trimmed up electrically,
turn the manual valve a few turns counterclockwise. This will
allow manual tilting of the engine.
Storing the Motor
Keep the motor in a vertical position when you store it.
NOTE: If you store the motor in a horizontal position, lay the motor
as shown in the figure.
EH, EHO, EO
IMPORTANT: When removing the motor from the package or
removing the motor from the boat, never release the reverse lock
lever. If the reverse lock lever is released, it will be very easy for
the transom bracket to spring up to the tilting direction because it
is not secured.
1. Secure the transom bracket to the outboard with a rope.