EasyManuals Logo

Mercury 40/50 Series User Manual

Mercury 40/50 Series
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #137 background imageLoading...
Page #137 background image
STORAGE
127
Remove the spark plugs and inject a five second spray of
storage seal around the inside of the cylinder.
Rotate the flywheel manually several times to distribute the
storage seal in the cylinder. Reinstall spark plug.
Gearcase
Drain and refill the gearcase lubricant (refer to Gearcase
Lubrication).
Positioning Outboard for Storage
Store outboard in an upright (vertical) position to allow water to
drain out of the outboard.
NOTICE
Storing the outboard in a tilted position can damage the outboard.
Water trapped in the cooling passages or rain water collected in
the propeller exhaust outlet in the gearcase can freeze. Store the
outboard in the full down position.
Battery Storage
Follow the battery manufacturer's instructions for storage and
recharging.
Remove the battery from the boat and check water level.
Recharge if necessary.
Store the battery in a cool, dry place.
Periodically check the water level and recharge the battery
during storage.
Pre‑Season Check
Have your dealer check the engine before the season starts, or if
you prefer, be sure to check the following items yourself:
Check the electrolyte level, and measure the voltage and
specific gravity of the battery.
Specific Gravity at 20 °C Terminal Voltage (V) Charge Condition
1.120 10.5 Fully discharged
1.160 11.1 1/4 charged

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury 40/50 Series and is the answer not in the manual?

Mercury 40/50 Series Specifications

General IconGeneral
BrandMercury
Model40/50 Series
CategoryOutboard Motor
LanguageEnglish

Related product manuals