MAINTENANCE
107
EPA Emissions
EMISSION CERTIFICATION LABEL
An emission certification label, showing emission levels and
engine specifications directly related to emissions, is placed on the
engine at time of manufacture.
a - Idle speed
b - Engine horsepower
c - Timing specification
d - Recommended spark plug and gap
e - Valve clearance (if applicable)
f - Family number
g - Maximum emission output for the engine family
h - Piston displacement
i - Date of manufacture
OWNER RESPONSIBILITY
The owner/operator is required to have routine engine
maintenance performed to maintain emission levels within
prescribed certification standards.
The owner/operator is not to modify the engine in any manner that
would alter the horsepower or allow emission levels to exceed their
predetermined factory specifications.
Inspection and Maintenance Schedule
BEFORE EACH USE
• Check that lanyard stop switch stops the engine.
EMISSION CONTROL
INFORMATION
TIMING (IN DEGREES):
FAMILY:
FEL:
cc
IDLE SPEED :
hp
GAP
:
g/kW
h
Standard spark plug:
Suppressor spark plug:
This engine conforms to model year EPA regulations for Marine SI engines.
Refer to Owner's Manual for required maintenance.
Valve Clearance (Cold) mm
Intake
Exhaust
a
b
c
d
e
f
g
h
i
28405
To Next Page
Loading...
