EasyManuals Logo

Mercury 40/50 Series User Manual

Mercury 40/50 Series
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #121 background imageLoading...
Page #121 background image
MAINTENANCE
111
2. Lift rear of cowl and disengage front hook.
26851
INSTALLATION
1. Engage the front hook and push cowl back over the cowl seal.
2. Push cowl down and move the rear latch lever up to lock.
Battery Inspection
The battery should be inspected at periodic intervals to ensure
proper engine starting capability.
IMPORTANT: Read the safety and maintenance instructions
which accompany your battery.
1. Turn off the engine before servicing the battery.
2. Ensure the battery is secure against movement.
3. Battery cable terminals should be clean, tight, and correctly
installed. Positive to positive and negative to negative.
4. Ensure the battery is equipped with a nonconductive shield to
prevent accidental shorting of battery terminals.
Fuel System
!
WARNING
Fuel is flammable and explosive. Ensure that the key switch is
off and the lanyard is positioned so that the engine cannot start.
Do not smoke or allow sources of spark or open flame in the area
while servicing. Keep the work area well ventilated and avoid
prolonged exposure to vapors. Always check for leaks before
attempting to start the engine, and wipe up any spilled fuel
immediately.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury 40/50 Series and is the answer not in the manual?

Mercury 40/50 Series Specifications

General IconGeneral
BrandMercury
Model40/50 Series
CategoryOutboard Motor
LanguageEnglish

Related product manuals