Mercury 40/50 Series User Manual

OPERATION
105
2. Turn the key switch counterclockwise to the "OFF" position or
pull the lanyard. The engine will then stop. The engine can
also be stopped by pressing on the lanyard switch.
a - Off
b - On
c - Stop switch lock plate
NOTE: Please follow the instructions below:
• Disconnect the fuel connector from the engine.
• After the engine has stopped, close the air vent screw on the
fuel tank cap.
• Disconnect the battery cables from the battery if the engine
will not be used for an extended period of time.
3. Disconnect the fuel connector from the engine.
38345
4. Close the air vent screw on the fuel tank cap.
a - Air vent screw
39943
a
b
c
38342
a

Mercury 40/50 Series Specifications

General

Brand	Mercury
Model	40/50 Series
Category	Outboard Motor
Language	English