Mercury 40/50 Series - Page 127

MAINTENANCE
117
5. Remove the cotter pin, propeller nut, stopper, and washer.
a - Cotter pin
b - Nut
c - Washer
d - Stopper
e - Propeller
f - Propeller thrust holder
6. Pull propeller straight off the propeller shaft. If the propeller is
seized to the propeller shaft and cannot be removed, have the
propeller removed by an authorized dealer.
7. Coat the propeller shaft with Quicksilver or Mercury Precision
Lubricants Anti‑Corrosion Grease or 2‑4‑C with Teflon.
Tube
Ref No.
Description Where Used Part No.
94
Anti-Corrosion
Grease
Propeller shaft 92-802867Q 1
38390
a
c
e
b
d
f