Mercury 40/50 Series User Manual

MAINTENANCE
119
INSTALLING PROPELLER
1. Install the propeller thrust holder, propeller, washer, nut,
stopper, and cotter pin onto the propeller shaft.
a - Cotter pin
b - Nut
c - Washer
d - Stopper
e - Propeller
f - Propeller thrust holder
2. Place the propeller nut retainer over the pins. Place a block of
wood between the gearcase and propeller. Tighten the
propeller nut to the specified torque.
Description Nm lb‑in. lb‑ft
Propeller nut 75 55
3. Install the spark plug leads.
38390
a
c
e
b
d
f

Mercury 40/50 Series Specifications

General

Brand	Mercury
Model	40/50 Series
Category	Outboard Motor
Language	English