Mercury 40/50 Series User Manual

OPERATION
87
3. Squeeze the primer bulb until firm.
a - To fuel tank
b - To engine
c - Fuel flow direction
IMPORTANT: To prevent the engine from flooding, do not
squeeze the primer bulb after the engine has warmed up.
4. Install the lanyard cord.
a - Lanyard cord
b - Lanyard switch
c - Lanyard switch
d - Lanyard cord
e - Hook
IMPORTANT: Be sure to connect the lanyard stop switch to your
body. The engine is shut down if the stop switch is
disconnected.
STARTING (MANUAL START)
IMPORTANT: Before starting, read the Pre‑Starting Check List,
special operating instructions, and Engine Break‑in Procedure in
the Operation section.
37714
a
c
b
38346
a
b
e
c
d

Mercury 40/50 Series Specifications

General

Brand	Mercury
Model	40/50 Series
Category	Outboard Motor
Language	English