Mercury 45 User Manual

OPERATION
60
2. Open fuel tank vent screw (in filler cap) on manual venting type
fuel tanks.
19748
3. Connect the fuel line to the outboard.
3106
4. Squeeze the fuel line primer bulb several times until it feels
firm.
19779
5. Set the lanyard stop switch to "RUN" position. Refer to
General Information ‑ Lanyard Stop Switch.
19791
6. Shift outboard to neutral (N) position.
NN
3107

Mercury 45 Specifications

General

Horsepower	45 HP
Cylinders	3
Starting	Electric
Full Throttle RPM Range	5000-6000 RPM
Steering	Remote
Exhaust	Through Prop
Shaft Length	20 in