MAINTENANCE
78
1. Open the fuse holder and look at the silver colored band inside
the fuse. If band is broken, replace the fuse. Replace fuse with
a new fuse with the same rating.
3112
a
b
c
a - Good fuse
b - Blown fuse
c - Fuse holder
Corrosion Control Anode
The outboard has corrosion control anodes at different locations.
An anode helps protect the outboard against galvanic corrosion by
sacrificing its metal to be slowly eroded instead of the outboard
metals.
Each anode requires periodic inspection, especially in saltwater
which will accelerate the erosion. To maintain this corrosion
protection, always replace the anode before it is completely
eroded. Never paint or apply a protective coating on the anode as
this will reduce effectiveness of the anode.
To Next Page
Loading...
Need help?
General
