Fluid Transfer Pump 8M0180953
Aids in the removal and addition of
engine fluids.
Oil Drain Hose 8M0129230
Aids in the removal of engine oil without
draining the crankcase. Connect to the
crankcase oil pump.
6. Place the fluid transfer pump drain tube into an appropriate container. The
container should be large enough to hold more than 15 liters
(15.85 US qt).
7. Extract the engine oil with the pump.
8. Allow the drain tube to completely drain before removing the pump
assembly from the dipstick tube.
9. Press on the fluid drain hose lock button to release it from the dipstick
tube.
10. Install the dipstick. Verify it is completely inserted.
11.
Add the appropriate amount of engine oil. Refer to Oil Filling.
CHANGING OIL FILTER
1.
Open the hood. Refer to Hood Opening.
2. Locate the oil filter and remove it by turning counterclockwise.
a - Oil filter
MAINTENANCE
96 eng
To Next Page
Loading...
