EMISSIONS
90-855347R1 JANUARY 1999 Page 3D-7
Replacement of Certification Label
IMPORTANT: By federal law, it is required that all 1998 and newer Mercury Marine
outboards have a visible and legible emission certification label. If this label is mis-
sing or damaged, replacement labels can be obtained from Mercury Marine.
Removal
Remove all remaining pieces of the damaged or illegible label. Do not install new label
over the old label. Use a suitable solvent to remove any traces of the old label adhesive
from the display location.
Date Code Identification
Cut and remove a “V” notch through the month of engine manufacture before installing
the new label. The month of manufacture can be found on the old label. If the label is mis-
sing or the date code illegible, contact Mercury Marine Technical Service for assistance.
JAN FEB MAR APR MAY JUNE JULY AUG SEP OCT NOV DEC
Emission Control
Information
1998
PART # 37–855211 27
This engine conforms to 1998 Model Year
U.S. EPA regulations for marine SI engines.
Idle Speed (in gear): 550 RPM
Timing: Not Adjustable ECM
Controlled
Spark Plug: Champion PZFR5F-11
Gap: .040”
Valve Clearance (Cold) mm
Intake: N/A Exhaust: N/A
Family: WM9XM03.0220
FEL: 100.00 GM/KW-HR
2508
cc
135 HP DFI
Refer to Owners Manual
for required maintenance
a
b
a-“V” Notch
b-Month of Manufacture
Installation
Install the label on a clean surface in the original factory location.
To Next Page
Loading...
Need help?
General
