Mercury Racing Sterndrive 600SCi - Page 105

MAINTENANCE
95
Installation
1. Install the Bravo XR replaceable hub propeller components in
the order shown:
b
c
d
e
f
g
a
8020
94
a - Propshaft
b - Prop hub assembly
c - Propeller assembly
d - Washer
e - Belleville washer
f - Washer
g - Locknut
Tube Ref No. Description Where Used Part No.
94
Anti-Corrosion
Grease
Exposed surfaces of
propeller shaft
92-802867A1
2. Apply the following lubricants to the entire exposed surface of
the propshaft:
• Salt Water: Anti‑Corrosion Grease
• Fresh Water: Anti‑Corrosion Grease or Optimal Paste
White T‑Grease
3. After first use:
• Re‑tighten propeller nut.
• Check propeller at least every 20 hours of operation.
• Do not operate with a loose propeller.
Description Nm lb. in. lb. ft.
Propeller nut 75 55