2
6
3
4
5
1
5
2
6
3
4
1
7
1. Select the ‘chef’s hat’ symbol from the Main
Menu to enter Development Mode.
Enter Stage 1 of the Cooking Program
2. The temperature displays the set preheated oven
temperature.
To increase or decrease the temperature required,
select the temperature symbol (2), enter the
temperature in the keypad within the limits
displayed and select OK.
3. Select and set the cooking time up to a
maximum of 10 minutes for each stage.
For example: Enter 110 (1 minute and 10 seconds).
4. Select and set the Microwave Power [0,5-100%]
5. Select and set a fan speed (if available) within
the limits shown on screen.
6. Select the information icon to enter an
instruction (optional). The instruction appears in
the display at the beginning of that stage.
For example: ‘Stage 1 place product in the oven’
Enter further stages of the Cooking Program
(optional)
7. Programs can have up to a maximum of 6 stages.
Repeat the steps 2-6 from stage 1 above.
Enter the cooking time
on the pad.
Select OK to accept the
time.
Running and saving the Cooking Program
1. Select OK to conrm the Cooking Program.
2. Run the Cooking Program (optional).
If the results are not satisfactory, select the
backspace, change the cooking settings and retest.
3. Select the save cookbook symbol to record the
Cooking Program to the cookbook.
4. Select the camera icon to open pictures.
5. Select a picture to represent the Cooking
Program (use the scroll arrows for more pictures).
6. Enter the name for the Cooking Program, using
a maximum of 20 characters, for example, ‘1
BURGER’, then select OK to save the program to the
cookbook.
NOTE: A green tick on a book indicates the Cooking
Program has been saved to the cookbook.
To set the cooking time
select the Time symbol.
Example below: Setting the cooking time (step 3):
STAGE 1
DISPLAYED
ADD STAGE
STAGE 2
DISPLAYED
BACK TO
STAGE 1
CLEAR
DEVELOPMENT MODE: CREATING A COOKING PROGRAM
WARNING
ENSURE PRODUCT IS IN THE OVEN
AND ALL SAFETY PRECAUTIONS
ARE FOLLOWED BEFORE RUNNING
THE PROGRAM.
DELETE STAGE
To Next Page
Loading...
Need help?
General
