1
1
2
2
3
5
3
4
1 2 3
Change the
order of a
selected item
shown in the
‘Press&GO’
screen.
Move a
selected item
to or from the
‘Press&GO’
screen.
Select to scroll
a list up or
down.
Press&GO®
Running a Cooking Program from the
Press&GO® Menu
1. Select ‘Press&GO’ from the Main Menu Screen.
2. Select the item required to cook.
3. The display shows the cooking time count down.
The timer bar turns red to indicate the cooking
cycle has nished.
NOTICE
ENSURE THERE IS FOOD PRODUCT IN THE OVEN
BEFORE STARTING A COOKING PROGRAM.
WARNING
HOT SURFACE HAZARD
USING A COOKBOOK PROGRAM
Choosing which Cooking Programs are
shown in the ‘Press&GO’ Menu Screen
1. After selecting ‘Press&GO’ from the Main Menu
Screen, select the ‘EDIT’ symbol.
2. Two lists are displayed, the ‘Press&GO’ menu
items are shown in the upper list and the lower list
shows other menu items which are available. Both
lists can be scrolled up or down using the arrows
on the extreme right.
3. Select an item, then choose whether to change
its order within the menu or to remove it into the
lower list.
4. Select an item to move into the upper list,
making it available in the ‘Press&GO’ menu.
5. Select backspace to return to the Menu Screen
when nished.
To nd the required program in the cookbook.
1. Select ‘COOKBOOK’ from the Main Menu Screen.
2. Select the ALL MENUS symbol.
3. Use scroll up/down arrows to nd the program.
NOTE: If an image has a red line around it the oven
temperature is set too high or too low for that recipe.
See ‘CHANGING THE OVEN TEMPERATURE’.
Taking all the necessary precautions to ensure you
do not burn yourself, place the food product into
the hot oven cavity and close the door.
To Next Page
Loading...
