One or more fans had failed, M=Light LED was switched off. The fans have been
remedied and are functional; M=Light LED can be switched back on.
The highest temperature value currently measured at the connected M=Light LEDs is
31°C.
The lowest fan speed value currently measured at the connected M=Light LEDs is
3,600 rpm.
Shows all M=Light LEDs connected with the software, regardless of any group in
which the LEDs may also be included.
Group of M=Light LEDs with the name Film Pit , in which one or more M=Light LEDs
indicate an error.
Group of M=Light LEDs with the name Block , in which NO M=Light LED indicates an
error.
Individual M=Light LED with the address 0x02, which indicates an error.
Individual M=Light LED with the description Right and the address 0xA1, that does
NOT indicate an error.
To Next Page
Loading...