MESSRING M-LIGHT LED - Parameter Transmission and LED Switch-off; Sending Parameters to M=Light LED; Switching Off M=Light LED

58 pages

To Next Page

To Previous Page

Software

Operating the Software

8LE-D23_BA_E

20.03.2015

Send the set parameters to M=Light LED

 Pre-select the parameters as required.

 Highlight the M=Light LED to which the settings are to be transmitted.

 Press Send.

 The set parameters are transmitted to the highlighted M=Light LEDs.

Switching off an Operating M=Light LED.

 Highlight the M=Light LED that is to be switched off.

 Press OFF.

 The highlighted M=Light LED(s) is/are switched off.