MESSRING M-LIGHT LED - Firmware and FPGA Updates; FPGA Update Procedure

Software
Operating the Software
8LE-D23_BA_E
20.03.2015
41
/
58
Performing an FPGA update
 Highlight an M=Light LED using the left mouse button.
 Press in section FPGA Update.
 The browser window for selection of the update file is opened.
 Only use update files that have been approved by MESSRING for your M=Light LED.
 Press Update.
 Wait for the update to be completed, DO NOT abort the process.
 The firmware update has been performed.