MetalMaster PB-830T User Manual

11
OPERATION MANUAL
3.5 FILL THE HYDRAULIC OIL TANK.
Cover
Oil Level Indicator
1. Remove the oil tank cover.
2. Make sure the inside of the tank is clean and clear of any dirt
3. Using a pump, ll the tank with oil until the level reaches the top mark of the oil indicator.
Observation of the oil level indicator should be done regularly to ensure the oil is kept at the same
level.
When lling the tank with oil, make sure that the top of the tank is clean and free from dust and dirt.
3.4 ATTACHING THE ACCESSORIES.
q Bolt on the arms that support the back gauge. Ensure they are square to the table. (Fig 3.2)
q Bolt on the apron safety guards (Fig 3.3)
Fig.3.2 Fig.3.3
07/11/2019
Instructions Manual for PB-460 (S581B)
11

MetalMaster PB-830T Specifications

General

Brand	MetalMaster
Model	PB-830T
Category	Industrial Equipment
Language	English