Metasys WEK - Decommissioning; Disassembly; Recycling and Disposal

EN | Decommissioning
20
8. Decommissioning
8.1. Disassembly
Warning:
Removefrompowersourcebeforedisassembly!
Warning:
Riskofcontamination:Toavoidinfection,wearpersonalprotectiveequipment(hand,eye,noseandmouthprotection)and
disinfect and clean the device!
If it is necessary to return the device to the depot or to METASYS, the original METASYS packaging must be used. Before packing the METASYS device to be
transported,cleananddisinfectit.Possibleopeningswhereresidualuidscouldescapemustbeclosed.
8.2. Recycling and disposal
The device may be contaminated! Advise the disposal company of this so that appropriate precautions can be taken. Parts that are
contaminatedwithamalgam,suchassieves,lters,hoses,etc.,mustalsobedisposedofinaccordancewiththenationalregulations.
Uncontaminatedplasticpartsofthedevicecanberecycledasnormalplastics.Theintegratedelectroniccomponents(includingcircuitboard)aretobedisposed
ofaselectronicwaste.Metalpartsaretobedisposedofasscrapmetal.
Alternatively, the device can be returned to the manufacturer for proper disposal. Before packing the METASYS device to be transported, clean and disinfect it.
Possibleopeningswhereresidualuidscouldescapemustbeclosed.TheoriginalMETASYSpackagingmustbeusedforshipping.
The proof of installation and the device logbook must be kept for 5 years after the device has been disposed of.