EN | Product description
8
4. Product description
4.1. Product description
ThewaterdecontaminationsystemWEKisusedforsoftware-controlleddosingofGREEN&CLEANWKintothewatersupplyofmedicaltreatmentunitsandfor
separatingthetreatmentwaterfromthesupplyingpipe.
4.2. Technical data / performance data
WEK Built-in version with cover
Powersupply 24 V AC 230 V AC
Frequency 50/60 Hz 50/60 Hz
Max. current consumption 1,2 A 100 mA
Permissiblewaterpressure 1 - 6 bar 1 - 6 bar
Operatingwaterpressure 2,5 bar 2,5 bar
Permissible air pressure 3,5 - 8 bar 3,5 - 8 bar
Operating air pressure 3,5 bar 3,5 bar
Max.waterowrate 1 l/min 1 l/min
Disinfectant GREEN&CLEAN WK hydrogen peroxide, 2% solution GREEN&CLEAN WK hydrogen peroxide, 2% solution
Mixing ratio
1:85Standardsetting
1:42Intensivedecontamination
1:85Standardsetting
1:42Intensivedecontamination
Working solution 235 ppm 235 ppm
Weight 5,9 kg 9,8 kg
Dimensions(HxWxD)
withoutbottle:220x160x115mm
withbottle:235x160x115mm
335 x 265 x 160 mm
Water consumption - syringe 100 – 130 ml/min 100 – 130 ml/min
Water consumption - turbines, straight
and contra-angle handpieces
50 – 70 ml/min 50 – 70 ml/min
Water consumption - mouth rinsing
cup
150ml/llingofmouthrinsingcup 150ml/llingofmouthrinsingcup
Class MD class 1 MD class 1
4.3. Type plate
WEK Built-in version
Forversionswithoutamountingplate,thetypeplateislocatedonmodule4(mixing
container).
Forversionswithamountingplate,thetypeplateislocatedonthemountingplate.
WEK with cover
Thetypeplateislocatedonthehousing(nexttotheexternaldisplay-pushthelidof
thecoverupwards).