Page 50 Micro Rain Radar MRR-2 METEK
2012-02-29 Valid for MRR Service Version 6.0.0.3 / Firmware 6.00
The software is supplied on a CD-ROM with the following file:
MRRSetup.exe the setup program
After installation of the MRR software the port settings may be changed with
the MS registry editor regedit.exe at the key
HKEY_LOCAL_MACHINE\
System\
CurrentControlSet\
Services\
MrrSrvc\
Parameters
The port variables of this key are shown with their default settings. Change the
underlined values, if necessary :
Port REG_SZ COM1
BaudRate REG_DWORD 57600
(You must be logged in with administration rights to change
Windows® Registry parameters)
Every time when you change one or more MRR parameters in the
Windows® Registry you have to restart the MRR service because these
parameters are only read from the Registry when the service starts.
Open the
Start/Settings/Control Panel/Administrative Tools/Services -
menu in Windows® 2000. After selecting the MRRService, stop and start it
directly with the short cuts or open the Properties menu and use the Stop
and Start buttons.
To Next Page
Loading...