Page 16 Micro Rain Radar MRR-2 METEK
2012-02-29 Valid for MRR Service Version 6.0.0.3 / Firmware 6.00
Figure 7: Examples of MRR installations
5.3 Installation Procedure
Preparations:
A fixed vertical pole (Ø max. 49 mm, length min. 30 cm) is required for
attaching the antenna. Operating of the MRR-2 requires a 230 VAC mains
supply, with a fuse protection of 8 A (slow) minimum. To prevent disturbance
of the device by variations or breaks of the power supply we recommend the
use of a no-break power supply (UPS).
Required Tools:
17 mm wrench
5 mm hexagon socket screw key
To Next Page
Loading...