AquaLab TDL 5 MENUS
ment automatically stores every water activity reading in the inter-
nal memory. AquaLab TDL can store up to 8,000 records before the
memory is full. If you turn Auto Save “off” then the instrument does
not store data automatically, although you may store any individual
reading manually right after completing the test and before starting
the next test.
To manually store a water activity or append an annotation to the
active reading that has been autosaved, press the save icon button
after the water activity measurement is completed. Pressing the icon
opens a “Name” screen. You may give this reading a name by press-
ing the arrow buttons to highlight the letter and then pressing the
“Check” icon button. Press the save icon to save this data record
with the name you have specified.
Note: Pressing the save icon button without giving it a name saves
the reading without a name. If you do not press the save icon after
a reading, and the reading is autosaved, you cannot give it an anno-
tation later.
Beeps
Allows you to set the reading finished notification from four beeps
to continuous beeps. You may also turn the audible notification off.
Contrast
Allows you to set the contrast of the screen to your liking. Viewing
the screen from a sitting versus a standing position may require con-
trast adjustment for the best visibility in that position.
Diagnostics
For the TDL water activity meter, the diagnostics screens provide
you with an updated lid, base, sample, and laser temperature, as well
as laser intensity, atmospheric pressure and water activity offset.
25
To Next Page
Loading...
Need help?
General
