AquaLab TDL 11 COMPUTER INTERFACE
• Choose correct Com port
• Set/Verify Com Properties
!
Bits per second 9600
!
8 Databits
!
No parity
!
1 stop bit
!
Flow control set to none
After successfully connecting the AquaLab to your computer and
upon completion of a water activity reading, the data displays in
the terminal program in the format as follows: measurement time
(minutes), sample temperature, and water activity. Table 2 shows
an example data return.
Table 2: Terminal Data
Time since chamber
was closed
Temperature (
◦
C) a
w
3.1,
24.3, 0.862
57
To Next Page
Loading...
