METER WP4C User Manual

22
SERVICE
3. Remove the lid screw located on the back panel (Figure20).
Figure20 Lid screw
4. Carefully remove the lid by pulling the back of the lid upward and then sliding the lid
back (away from the front of the case) and off the unit completely.
5. Remove black foam (Figure21).
Figure21 Black foam
6. Unscrew the two thumb screws that secure the sensor block (Figure22).
Figure22 Thumb screws

METER WP4C Specifications

General

Brand	METER
Model	WP4C
Category	Measuring Instruments
Language	English