Functional description
22 100.000-count Graphical Multimeters
Functional description (cont'd)
Programming of the
number of records
Reminder
By defining a number of records for a measurement campaign, it is possible to
stop recording automatically.
•
Selection of the number of records (No. rec.) in the MEM Function menu
using the keys
.
•
Validation of No. rec. using the key.
•
Selection of the digit to be modified using the key.
•
Modification of the value using the keys.
•
Validation of the number of records and exit from the successive menus using
the key.
The recording capacity is limited to 6,500 measurements (158 for MTX 3281)
Number of records by default :
1,000.
Reading the
recorded data
Reminder
•
Select the Consult menu in the MEM
Function to view the list or successive
records.
Each recording is identified by its start
date and time.
•
Selection of a recording using the
keys.
•
Validation the selection using the
key.
When selected, a recording is accompanied by :
- the number of values recorded,
- the recording rate,
- the function in which they were recorded,
-
the secondary functions present during recording, if relevant.
The number of recording sequences is limited to 10.
Number of rec.
MEM Function
t
Erase
Erase all erase
Rate
Number of
recordings
No. rec.
u
28/03/05 10:41:08
29/03/05 11:05:20
5 val. (2 s), V
30/03/05 15:30:42
28/03/05 10:40:40
Recordings
To Next Page
Loading...
Need help?
General
