EasyManua.ls Logo

MG Hector Plus - Manual Air Conditioning; Control Panel

MG Hector Plus
250 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
125124
Manual Air Conditioning
Control Panel
1. Fan Control Knob
2. Front Windshield Defroster Button
3. Air Conditioning (A/C) Button
4. Internal Circulation Button
5. Rear Windshield Defroster Button /
Outside Rearview Mirror Defroster
Button*
6. Temperature Control Knob
7. Face Blowing Mode
8. Face/foot Mode
9. Foot Blowing Mode
10. Foot Blowing/Front Defrosting Mode
Note: Once the indicator of the button
illuminates, the corresponding function starts
to work.
HVAC
Temperature Control Knob
It is used to control temperature of the air
flowing out from the air outlet.
Turn the knob to the blue area and cool air
comes out; to the red area and warm air
comes out.
Fan Control Knob
Turn the fan speed control knob to control
the system air flow.
There are 8 wind speed gears in total, with the
maximum of Gear 8. Turn it to "OFF" to close
the air volume of the A/C system.
Air Distribution Mode Button
direction. Control the air to blow out from
the corresponding air outlet. Please refer to
the contents of "Air Distribution Mode" of the
above automatic constant temperature A/C.
Adjust the air distribution knob to the desired
mode so that the air flows in the desired
HVAC
Internal Circulation Mode Button
You can press this button during driving on a
dusty road, or when you want to prevent the
exhaust or outside smoke entering inside, or
when you want to quickly decrease or
increase temperature in the passenger area.
The indicator on the button illuminates and air
starts to circulate inside the vehicle.
Press this button again to switch to the
external circulation mode, the indicator will
go out and outside fresh air enters inside.

Table of Contents

Other manuals for MG Hector Plus

Related product manuals