8180
INSTRUMENTS AND CONTROLS
1. Engine Tachometer
2. Start And Stop System Shutdown
Indicator*
3. Start And Stop System Work Indicator*
4. 48v System Failure Warning Light*
5. E n g i n e C o m p a r t m e n t O p e n i n g
Indicator*
6. Left Turn Signal / Hazard Warning
Indicator
7. Front Fog Light Indicator*
8. Position Light Indicator
9. Rear Fog Light Indicator
10. Headlights High Beam Indicator
11. Abs Failure Warning Light
12. Brake System / Hand Brake Indicator /
Ebd Warning Light
13. Right Turn Signal / Hazard Warning
Indicator
14. Particle Trap Indicator Light*
15. Fuel Water Indicator Light*
16. Glow Plug Indicator Light*
17. Fixed Speed Cruise Work Status
Indicator*
18. Speedometer
19. Emergency Stop Light*
19a. SCR (Selective Catalytic Reduction)
Warning Light
20. Au t o m atic P a r k ing ( a v h ) W ork
Indicator*
21. Transmission Fault Warning Light*
22. Engine Anti-theft System Indicator /
Immolizer
23. Engine Failure Warning Light Mil
24. Oil Pressure Is Too Low Warning Light
25. Engine Water Temperature Is Too High
Warning Light
26. Charging System Fault Warning Light
27. Electronic Hand Brake Work Indicator*
28. Electronic Hand Brake Failure Warning
Light*
29. Automatic Parking (avh) Fault Warning
Light*
30. Driving Computer Display
31. Display Adjustment Lever
32. Tyre Pressure Monitoring System (tpms)
Failure Warning Light*
33. Driver Side Seat Belt Warning Light
34. Passenger Side Seat Belts Warning
Lights*
35. Airbag Failure Warning Light
36. Fuel Level Low Warning Light
37. Electronic Stability Control (esc) Fault
Alarm Notice Light
38. Electronic Stability Control System (esc)
Shutdown Refers To Light
39. Electronic Power Steering (eps) Fault
Warning Light
When the ignition switch is turned on, it is
used as a function test.
Most control lights will be activated for a short
time bright.
The Control Indicator Color Means:
Red = Dangerous, Important Reminder.
Yellow = Warning, Message, Fault.
Green = Confirm Enable.
INSTRUMENTS AND CONTROLS
Type - II Instrument Cluster