MG Hector Plus - Seat Variant; Ÿ Seat Overturn

3938
SEATS AND PROTECTIVE DEVICES SEATS AND PROTECTIVE DEVICES
To recover, pull up the drawstring and unfold
the backrest to a proper angle. Finally, try to
shake the backrest to check whether it is fixed.
Hold the backrest first and do not make
the head or other body parts within the
backrest folding range before pulling the
backrest drawstring and folding the
backrest. Otherwise, the backrest will be
folded quickly and may cause impact or
injuries.
Note
Rear Seat
Rear Seat (5 Seat Model)
Rear seat cannot be adjusted forward or
backward.
Armrest
Middle Row Seat
As shown in the figure, after the cushion is
unlocked, pull out the cushion forward and lift
up the rear part of the cushion to overturn it.
The two cushions can all be overturned.
To recover, install the cushion back in
opposite order, and press down the cushion
with force. Try to shake the seat cushion to
make sure that it is locked.
7 Seat Variant
Seat Backrest Adjustment and Folding
The seat backrest inclination angle is
adjustable within a certain range.
First hold the backrest with hands because the
backrest will be folded quickly and may cause
impact or injuries after the backrest release
belt is pulled up. Then, pull the backrest
release lever on the seat side backward, and
release the lever after a proper angle is
obtained.
To fold the seat backrest, pull up the lever and
fold the backrest forward. Overturning the
seat cushion first and then folding the backrest
can fold flat the backrest to the greatest
extent.
Seat Overturn
For the 7 seater variant, when you need to sit
at the rear seat you can overturn the left side
of middle row seat. As shown in the figure, you
can pull the lever until the seat lock is
detached. To recover, pull up the lever and
push back the seat until it safely locked in
position.
To recover, pull up the lever and unfold the
backrest to a proper angle. Finally, try to shake
the backrest to check whether it is fixed.
Hold the backrest first and do not make
the head or other body parts within the
backrest folding range before pulling the
backrest drawstring and folding the
backrest. Otherwise, the backrest will be
folded quickly and may cause impact or
injuries.
Note
As shown in the figure, the second row seat is
configured with an armrest. Deploy the
armrest for use. There is a cup holder on the
armrest. After use, please put back the
armrest.
Seat Position and Backrest Angle for
Measurement of Seat Cushion Thickness. For
measurement of the seat cushion thickness,
the seat can be in any position.
The seat backrest shall incline backward for a
certain angle from the vertical position. The
angle is 23°, 25° and 20° respectively for the
1st and 2nd row.