16
Warning
Message
Procedure
Airbag Fault
Indicates that the SDM has
detected a fault. As soon
as conditions permit, safely
stop the vehicle and switch
the vehicle power system to
the OFF position and contact
an MG Authorised Repairer
immediately.
TPMS Fault
Indicates that the tyre
pressure monitoring system
(TPMS) has detected a
fault. Please contact an MG
Authorised Repairer as
soon as possible.
Front Left/
Front Right/
Rear Left/
Rear Right
Tyre Sensor
Battery Low
Indicates that the TPMS has
detected a sensor has a low
battery. Please contact an
MG Authorised Repairer as
soon as possible.
12V Battery
Charging
System Fault
Indicates that the 12V battery
charging system has detected
a fault. Please contact an
MG Authorised Repairer
immediately.
Warning
Message
Procedure
DCDC
Charge Fault
Indicates that the CCU
has detected a fault. Please
contact an MG Authorised
Repairer immediately.
Vacuum
System Fault
Indicates that the vacuum
system has detected a
fault. As soon as conditions
permit, safely stop the
vehicle and switch the
vehicle power system to the
OFF position and contact
an MG Authorised Repairer
immediately.
Motor
Overheating
Indicates that the motor has
overheated. Please contact
an MG Authorised Repairer
as soon as possible.
Motor Fault
Indicates that the drive motor
has detected a fault. As soon
as conditions permit, safely
stop the vehicle and switch
the vehicle power system to
the OFF position and contact
an MG Authorised Repairer
immediately.
Instruments and Controls