EasyManua.ls Logo

MGI ZIP Navigator - 10.3 Upper and Lower Bag Strap Maintenance; 10.4 Correcting the Alignment; 10.5 MGI Service Schedule

MGI ZIP Navigator
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10.3 Upper and Lower Bag Strap Maintenance [See Maintenance
Schedule]
The bag straps should be replaced as per the Service Schedule. The
upper bag strap can be replaced by:
Removing the left and right hand straps form the upper bag
support.
Undo and remove the screws holding the strap in position on the
bag support.
Remove and replace both bag straps.
Insert bag strap securing screws.
10.4 Correcting the Alignment
Please see Zip Navigator Motor Trimming at mgigolf.com.
10.5 MGI Service Schedule
It is the owner’s responsibility to ensure that all periodical checks,
necessary adjustments and services are carried out. If in doubt please
contact the MGI service centre:
Australia 1300 644 523
USA 1800 617 2990
Any work performed on your Zip Navigator should be recorded on
your service record (see page 21) regardless of the work.
MGI Zip Navigator Monthly
6
Monthly
Every
2 yrs
Every
3 yrs
Wipe down the Zip
Navigator with a warm
cloth after each use [do not
hose]
BO
Lubricate rear wheel stub
axles
BO
Check and tighten nuts and
bolts
BO
Check and tighten handle
pivots
BO
Check alignment of Zip
Navigator – ensure that it
runs straight
BO
Replace Speed Controller
and On/Off switch assembly
BO /SC
Replace rear and front
wheels
BO
Replace upper and lower
bag straps
BO
BO = Zip Navigator owner can carry out this work
SC = Charged work to be carried by approved service centre
BO/SC = The six monthly service can be completed by either an authorised
service centre or the owner of the Zip Navigator.
MGI Zip Navigator User Manual 20

Other manuals for MGI ZIP Navigator

Related product manuals