Page 33
induSENSOR, EDS
5. Operation
The sensors have no adjustment and setting elements.
After assembly and connection of display/output device the sensor should warm-up 10 minutes to be ready
for operation.
Output signal: 4 mA (start of measuring range) up to 20 mA (end of measuring range)
i
The sensor is ready for measuring without adjustment.
Warm-up time: 10 min.
Output signal: 4 ... 20 mA
6. Operation and Maintenance
Observe the notes on measuring tube guiding during operation, see Chap. 4.2.
Imperfect measuring tube guiding can lead to increased wear and premature defects.
The warranty and all liability claims are null and void if the device is worked on by unauthorized persons.
Repairs are to be made exclusively by MICRO-EPSILON.
To Next Page
Loading...
Need help?
General
