MICRO-EPSILON induSENSOR EDS Series - 1 Safety; Symbols Used; Warnings

Page 5
induSENSOR, EDS
1. Safety
The handling of the system assumes knowledge of the instruction manual.
1.1 Symbols Used
The following symbols are used in this instruction manual:
Indicates a hazardous situation which, if not avoided, may result in minor or moder-
ate injury.
Indicates a situation which, if not avoided, may lead to property damage.
Indicates a user action.
i
Indicates a user tip.
1.2 Warnings
Connect the power supply according to the safety regulations for electrical operating equipment.
> Danger of injury
> Damage to or destruction of the sensor
The supply voltage must not exceed specified
limits.
> Damage to or destruction of the sensor
A
void banging and knocking the sensor.
> Damage to or destruction of the sensor
Avoid bending the sensor rod or the alu tube.
> Damage to or destruction of the sensor
Do not transport the sensor on the sensor rod.
> Damage to or destruction of the sensor
Sensor-
housing
Alu tube
Sensor rod
Sensor
housing