Need help?Do you have a question about the MicroNet SP5100/S and is the answer not in the manual?
Details the physical components, keypad functions, and connectivity ports of the IP phone.
Lists applications, calling features, network support, and audio codecs for the IP phone.
Covers device dimensions, weight, power, and operating/storage environment conditions.
Guides through the initial boot process, systemizing, and entering standby mode.
Explains how to configure Call List, Forward Type, Phone Book, Ringer Settings, and Network via the LCD.
Setup IP address, subnet mask, gateway, and network connection mode via web interface.
Configure SIP connection mode, proxy details, line number, and account for IP-Phone.
Set up PPPoE authentication, username, password, and auto-reconnect for network access.
Change the login password for the IP Phone's administrator or user accounts.
Resets all IP-Phone configurations to factory default values.
Cleans flash ROM configurations to default values and reboots the IP-Phone.
Manage IP address, subnet mask, gateway, and network mode using ifaddr command.
Add, search, delete, or modify phone book entries using the pbook command.
Set SIP mode, proxy server, port, and line information using the sip command.
Adjust voice codec, packet size, volume, and echo cancellation using the voice command.
Upgrade IP-Phone firmware using TFTP/FTP server via the rom command.
Steps to upgrade firmware using the IP Phone's LCD menu and a TFTP/FTP server.
Procedure for updating IP-Phone software through the web interface.
Instructions for upgrading IP-Phone software using Telnet commands.
Details the physical components, keypad functions, and connectivity ports of the IP phone.
Lists applications, calling features, network support, and audio codecs for the IP phone.
Covers device dimensions, weight, power, and operating/storage environment conditions.
Guides through the initial boot process, systemizing, and entering standby mode.
Explains how to configure Call List, Forward Type, Phone Book, Ringer Settings, and Network via the LCD.
Setup IP address, subnet mask, gateway, and network connection mode via web interface.
Configure SIP connection mode, proxy details, line number, and account for IP-Phone.
Set up PPPoE authentication, username, password, and auto-reconnect for network access.
Change the login password for the IP Phone's administrator or user accounts.
Resets all IP-Phone configurations to factory default values.
Cleans flash ROM configurations to default values and reboots the IP-Phone.
Manage IP address, subnet mask, gateway, and network mode using ifaddr command.
Add, search, delete, or modify phone book entries using the pbook command.
Set SIP mode, proxy server, port, and line information using the sip command.
Adjust voice codec, packet size, volume, and echo cancellation using the voice command.
Upgrade IP-Phone firmware using TFTP/FTP server via the rom command.
Steps to upgrade firmware using the IP Phone's LCD menu and a TFTP/FTP server.
Procedure for updating IP-Phone software through the web interface.
Instructions for upgrading IP-Phone software using Telnet commands.
To Next Page
General