EasyManua.ls Logo

MicroNet SP5100/S - Rom Configuration

MicroNet SP5100/S
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.9. Rom Configuration
Please refer to chapter 4.18 [rom] command
FTP/TFTP Server IP Address: Set TFTP server IP address
Target File name: Set file name prepared to upgrade
Method: Select download method as TFTP or FTP
FTP Login: Set FTP login name and password
Target File Type: Select which sector of IP-Phone to upgrade
Note:
A
fter 2mb file download is finished, all configurations might change to default values,
user has to configure again.
After upgrade Application, please remember to execute Flash Clean, which will
clean all configurations become factory values except IP address.
35